3 articles about case study — buying guides, process explainers and technical comparisons.
Case Study
How a 24-station, 4-up progressive die built, tried out and qualified in-house took an automotive terminal program to 300 SPM on an Aida press: ±0.005 mm piloted registration, selective gold 2-8 µm, and a PPAP submission built from production data.
2026-08-28 · 7 min read
ReadCase Study
How a Tier 1 pack integrator qualified laminated copper busbars and interconnect terminals in one chain: in-house progressive tooling, C10200 oxygen-free copper, ±0.005 mm piloted registration, selective gold 2-8 µm, and one quality record per lot.
2026-08-28 · 7 min read
ReadCase Study
How a European connector manufacturer qualified stamped terminals with selective gold plating in one pass: in-house progressive die, 300 SPM, ±0.005 mm registration, and XRF-verified 2-8 µm gold per reel.
2026-08-25 · 3 min read
ReadProgressive die stamping, in-house tooling and assembly — from prototype to mass production. Send your drawing and volume, get a quote within 24 hours.